Optidrive delivers a crushing performance!

View as PDF Adobe PDF
pict

COOLMORE QUARRY

Ireland FlagIreland

Related Products

Using Optidrive Plus 3GV to control a single rotary crusher has delivered some substantial benefits for a quarry in Ireland.

The Coolmore quarry in Cork is operated by John A Wood in Cork. The quarry uses a Sheepbridge single rotary crusher which was originally fitted with a 160 kW slip ring motor and starter combination. The replacement equipment was required to provide extremely reliable control together with significant energy savings at start up.

The electricians at John A Woods had initially calculated that a 200 kW AC motor would be required to cope with the load. After detailed tests and analysis however, The Reliance Bearing and Gear Company, working with Invertek Drives in Ireland, were able to recommend a 160kW squirrel cage motor controlled by an Optidrive Plus 3GV.

The first challenge was reducing energy consumed on start up. Traditionally slip ring motors are commonly used on high inertia loads because of their superior starting torque, efficiency and their ability to start high inertia loads.

Starting this type of high inertia load direct-on-line with a standard squirrel cage motor typically takes up to 550% of rated current for 60 seconds. Starting the same machine with a slip ring motor requires only 200% increase in current for around 20 seconds. In this instance the Optidrive Plus 3GV, together with a squirrel cage motor, was able to start the system in only 40 seconds whilst taking only 27% of motor rated current. This provides an extremely energy efficient solution.

As the stone feeds into the crusher a peak load is created, which could have led to the drive tripping on over current. In addition, the crushing drum can undergo very short periods of light load inbetween crushing one large stone and starting on the next one. This could cause the drum to speed up and the drive to trip on over voltage. Reliance Bearing and Gear were able to overcome these challenges by fitting a brake resistor and adjusting the perfomamce of the Optidrive Plus 3GV vector speed controller.

The next challenge was to guarantee that if the machine was not running at the rated operating speed for any reason it would not fill with material and cause a blockage. The Optidrive Plus 3GV. was programmed to provide control signals to the feeder line. The result was that if the drive tripped or was not at full speed the feeder would then also stop, the momentum of the rotor would crush the material in the crusher and the machine would be cleared.

Finally, the spin start feature on the drive was enabled to provide rapid and smooth re-start in the event of losing the incoming power supply. The spin start feature is able to detect the speed of the motor and then match the drive to that speed before accelerating to its final operating frequency.

Stephen Tighe of Invertek Drives in Ireland confirms: "The Optidrive Plus 3GV. has delivered excellent energy savings in this application whilst maintaining extremely high levels of performance and reliability. We would certainly expect this success to lead to increased demand for Optidrive Plus 3GV.

Related Case Studies

Browse All Case Studies

Find your local office or sales partner, covering 80 countries worldwide

Global Website