Ensuring rubber compounder mills capable of operating with bulk weighing up to three tons could stop within 1/6th of a revolution and reverse to meet European EN safety standards was going to be a tough challenge for materials specialist Clwyd Compounders.
A leader in the design, mixing and manufacture of rubber compounds for some of the world’s leading companies in the aerospace, oil and gas industries, the Wrexham, UK based company turned to Invertek Drives to see how its variable frequency drives (VFD) could help it meet the BS EN 1417:2014 Safety Standard for Rubber Mills.
The need for a solution was exacerbated by a move to a new bespoke manufacturing facility close to its existing site where it was founded in 1979.
Its rubber mill and mixing machines had been previously exempted from the regulations but would have to meet the standard when they were moved and recommissioned.
“The EN standard is quite specific in that if a safety bar is pressed in an emergency, the mill rolls have to separate by 35mm within three seconds, and additionally the three-ton rolls must stop within 1/6th of a revolution.
"In addition, automatic reversal of the rolls has to occur within two seconds of the mill stopping,” said John Haywood, founder and chairman of Clwyd Compounders.
“Our mills vary in size, carrying a lot of bulk with 30kw to 250kw motors operating at speeds up to 1,000rpm. The rolls themselves typically operate around 30RPM depending on the material. This means in an emergency situation, and to meet the EN standard, there is a lot of danger as you’re having to stop and then place them into reverse almost instantly.
“The mills must also shut down safely if the mains power supply is lost, which is something which had proved to be an extremely challenging case to handle in the past. The drive must be capable of recovering enough energy from the mill itself to accomplish a safe stopping condition within the allowed time.
“Additionally, some of the mills can go to a massive overload in short time periods and so we needed drives capable of handling this.”
The company’s internal team considered the problem and then met with Invertek’s technical team that helped identify a motor control solution using its Optidrive P2 VFDs, including the large Size 8 with 250kW motor output rating.
Kes Beech, Technical Manager at Invertek Drives, said: “We were confident from the outset that the Fast Stop on Mains Loss feature of our Optidrive P2 along with the excellent motor control performance would ensure the machines would meet the safety standard requirements.
"Additionally, the Function Block programming would allow us to create a simple system for automatic reversing.
It also comes in IP20, IP55 and IP66 enclosures, making it ideal for industrial and heavy-duty environments, including outdoors.
Mr Haywood added: “We’ve been impressed with the quality and durability of the Optidrive P2 and the technical back-up we’ve received from Invertek and its sales partners. Our customers demand exacting standards, and it’s good to see another company like Invertek providing those same values.”
More details about the Invertek Optidrive VFD range can be found at www.invertek.com.
For more media information, contact:
Owain Betts, t: +44 (0)1938 55 68 68 m: +44 (0)7787 437 052
E: Owain.Betts@invertek.co.uk
www.invertekdrives.com
Download the media release here:
