An IP66 Sun Shade should always be fitted (in accordance with these instructions) where the product is installed outdoors, and there is a possibility for the display of the drive to come into the path of direct sunlight or where there is possibility of snow, ice, or other particles accumulating on the top of the drive.

Recommended clearance before installation

Ensure you have at least 30mm either side and 100mm above the drive to allow sufficient space for installation of the IP66 Sun Shade.

Installing the IP66 Sun Shade

Install the Optidrive following the instructions in the User Guide. Place the IP66 Sun Shade over the Optidrive and slide down until it slots on top of the heat sink, then fix in place using the mounting holes.

Product Code
Description
Width (mm)
Height (mm)
Depth (mm)
Weight (kg)
OPT-3-HAT01
Sun shade for size 1
Dimensions in mm
232
119.7
225
1
OPT-3-HAT02
Sun shade for size 2
Dimensions in mm
275.5
139.7
285
1.5
OPT-3-HAT03
Sun shade for size 3&4
Dimensions in mm
340.7
169.7
355
2.5